Burst supply line, overflowing toilet, a storm that found the weak spot in your roof: whatever let the water in, the clock started when it did. One call to +1-323-329-3586 routes you to an independent restoration pro in King County who takes emergency calls around the clock.
We are a free referral line. Business Leak Detection does not send out its own crews; every call is matched with an independent restoration contractor serving King County who carries the license and insurance the work calls for. You explain the problem once, and the right specialist is connected with you.
The contractors in the network do this work every week: pulling standing water with truck-mounted extractors, setting air movers and dehumidifiers, reading moisture behind baseboards, and cutting out wet drywall before it becomes a mold job. They know a slab leak from a roof leak, and they price the job before they start.
Water damage rarely waits for business hours, so neither does the line. Nights, weekends, and holidays get the same response as a Tuesday morning, and if the first contractor is tied up, the call moves to the next one covering your part of the county.
Not every leak announces itself with a gush. Some of the worst damage starts quietly behind walls and under floors, and if you notice any of the following, it's worth calling today rather than next week.
Below is the work contractors in the network handle most often. Tell the dispatcher which one fits, or just describe what you're seeing and they'll sort it out.
Standing water keeps soaking into drywall, subfloor, and framing for as long as it sits. Contractors arrive with truck-mounted or portable extraction units, pull water out of carpet and pad, and pump out flooded rooms so drying can start the same day.
Part of that first visit is classifying the loss: clean water from a supply line, gray water from an appliance, or contaminated Category 3 water. That call decides what can be dried in place and what has to go.
Most residential calls trace back to a handful of culprits: a split washer hose, a failed water heater tank, a cracked toilet supply line, or roof flashing that let go. The contractor finds and stops the source, dries what can be dried, and rebuilds what can't.
They'll photograph the damage, log readings room by room, and hand you paperwork your insurer can use if you decide to file.
Businesses lose revenue every hour the doors stay shut. Commercial contractors bring bigger equipment, including desiccant dehumidifiers and multiple extraction units, and they'll schedule around your operating hours when the space allows.
Expect containment barriers that keep dust and moisture out of unaffected suites, coordination with your property manager, and the drying logs your adjuster will ask for.
Getting the puddle up is the easy part. The real work is drying what's underneath, using air movers angled along the walls, dehumidifiers sized to the room, and daily meter readings until drywall, studs, and subfloor return to normal moisture levels.
Infrared cameras spot cold, wet areas inside walls, and drilling small holes behind the baseboard lets air into the cavity so it dries without being gutted.
Once the structure is dry, the visible repairs start: replacing sagging ceiling drywall, patching and texture matching, new insulation, baseboard, and flooring. Many contractors handle both mitigation and rebuild, so you aren't juggling two companies.
Ask about texture and paint matching on ceilings and walls; a good repair shouldn't leave a visible patch.
Water from a sewer backup or rising floodwater is treated as contaminated. Crews suit up in protective gear, tear out porous materials that can't be cleaned, apply antimicrobial treatment, and dry the space under containment.
Don't try to mop this one yourself, and keep kids and pets out of the area until a professional has cleaned and treated it.
Four steps, usually in the order below. The first one takes about two minutes.
Dial +1-323-329-3586 and tell the dispatcher what happened, where the water is, and whether it's still coming in. If you can safely shut off the main valve or breaker, do it first.
An independent contractor serving your area gets your details and confirms an arrival window. For active leaks and flooding, crews often arrive within the hour.
On site, the contractor traces the source, maps wet areas with meters and a thermal camera, and explains the scope and price before work starts.
Extraction and drying begin with daily moisture checks. Once materials are dry, repairs follow, and you keep photos and readings for your records or insurer.
You could search and call contractors one by one at 2 a.m. Here's why people call this line instead.
No vague estimates. The contractor explains scope and cost before any work begins, and changes get discussed with you first.
Emergency calls jump the queue. Arrival depends on traffic and weather, but crews commonly reach active leaks within roughly an hour.
Calls are routed to contractors who already work your part of the county, so you aren't waiting on a crew driving in from hours away.
Every contractor is independent and expected to hold proper licensing and insurance. Ask to verify it on arrival, which reputable pros welcome.
Photos, moisture maps, and drying logs give your adjuster the evidence they need, which can speed up a claim.
If the first match doesn't work out, call the line again and you'll be connected with a different contractor. A good match is the whole point of the service.
Water heater burst at midnight and flooded the laundry room. The crew was there within the hour, extracted everything, and came back daily to check moisture until the drywall read dry.
We came home to the kitchen ceiling on the floor from an upstairs sink line. The quote was clear before work started, and the documentation made our claim straightforward.
I manage a small office building and a sprinkler head got knocked loose on a Saturday. They put up plastic containment, worked through the weekend, and we opened Monday with only one suite blocked off.
After a storm flooded our basement, the contractor explained why the floodwater counted as contaminated, removed the lower drywall and carpet, disinfected, and dried it out properly.
We had a musty smell for weeks. The contractor used a thermal camera to find a leak behind the shower wall, opened only what was needed, and repaired the subfloor.
Emergency calls get priority routing, and crews commonly reach the property in roughly an hour. You'll get an arrival window on the phone so you know when to expect them.
The call itself is free. Pricing comes from the contractor, who assesses the job and explains the cost before any work begins.
Contractors handle emergency extraction, flood pumping, drying setup, sewage and Category 3 cleanup, and temporary protection like tarps, 24 hours a day.
No. Business Leak Detection is a free referral service. The work is done by independent local contractors, and you agree on price and scope directly with them.
It depends on the cause. Policies usually cover sudden events like a split supply line but often exclude slow leaks and floodwater without separate flood coverage. The contractor's photos and moisture logs help either way.
Typical drying runs about three to five days. Dense materials like hardwood and concrete slabs can need more time, which is why moisture readings, not the calendar, decide when it's done.
Stop the source at the main shutoff, kill the breaker for affected rooms if it's safe, lift furniture off wet carpet with foil or blocks, and photograph everything.
Box fans help a little with the surface, but they don't reach water trapped behind drywall or under flooring. That hidden moisture is where mold starts.
Mold can begin growing within 24 to 48 hours on wet drywall, carpet pad, and wood, which is why fast extraction and drying matter so much.
They do. Commercial calls for offices, stores, restaurants, and apartment buildings are routed to contractors with the larger equipment and crews those jobs need.
Yes. There's no charge to call or to be connected. You only pay the contractor for work you agree to.
Yes, and you should. Every contractor is independent, and checking license and insurance before they begin protects you.
The network covers single-family homes, apartments, condos, townhomes, and commercial buildings in King County. Whether you're in a downtown high-rise or a house at the edge of the county, calls go to the closest available contractor.
Water damage looks different depending on the building. Older homes with plaster walls and crawl spaces dry differently than newer slab construction, and contractors familiar with local building styles know what to check first.
King County calls cover towns, suburbs, and rural roads. Properties on wells and septic systems are common outside town limits, and contractors who work the county know how those systems affect a water loss.
Travel distances in a county are longer than inside one town, so the line routes each call to whichever contractor sits closest to the property, not just the biggest name in the county.
The faster drying starts, the less you end up replacing. One call to +1-323-329-3586 connects you with an independent local pro, any hour.
Reach a dispatcher this minuteCall +1-323-329-3586