Burst supply line, overflowing toilet, a storm that found the weak spot in your roof: whatever let the water in, the clock started when it did. One call to +1-323-329-3586 routes you to an independent restoration pro in King County who takes emergency calls around the clock.


Business Leak Detection is a referral service, not a contractor. We run a 24/7 phone line that connects people dealing with water damage to independent, licensed and insured restoration contractors who work in King County. You talk to a real person, describe what happened, and get routed to a pro who handles that kind of job.
Most of the pros callers reach have spent years on water losses of every size, from one soaked closet to a flooded office floor. They carry moisture meters and thermal cameras, run commercial drying equipment, and keep drying logs an insurance adjuster can actually read. You get a quote before work begins, not a surprise afterward.
The line is staffed around the clock because leaks don't keep office hours. A pipe that splits at 3 a.m. on a holiday weekend gets the same routing as one that splits at noon, and if one contractor is busy, you're moved to another who covers your corner of the county.
Not every leak announces itself with a gush. Some of the worst damage starts quietly behind walls and under floors, and if you notice any of the following, it's worth calling today rather than next week.
These are the jobs that come through the line most. You don't need the right term; describe the problem and the call gets routed to someone who handles it.
Standing water keeps soaking into drywall, subfloor, and framing for as long as it sits. Contractors arrive with truck-mounted or portable extraction units, pull water out of carpet and pad, and pump out flooded rooms so drying can start the same day.
Before extraction, the contractor classifies the water as Category 1, 2, or 3 based on its source, because clean supply-line water and sewage backflow get handled very differently.
Homes take water from washing machine hoses, water heater failures, toilet supply lines, ice maker lines, and roof leaks. Residential contractors find the source, stop it, dry the structure, and then replace what can't be saved: drywall, baseboard, insulation, and flooring.
Good residential pros document everything with photos and moisture readings, which makes the insurance side much easier if you file a claim.
A flooded office, retail floor, or restaurant kitchen costs money every hour it stays closed. Commercial restoration contractors scale up with more extractors, larger desiccant dehumidifiers, and crews that can work after hours so you can stay partly open.
Expect containment barriers that keep dust and moisture out of unaffected suites, coordination with your property manager, and the drying logs your adjuster will ask for.
Removing visible water is half the job. Contractors set air movers to push air across wet surfaces and refrigerant or desiccant dehumidifiers to pull moisture out of the air, then check progress daily with moisture meters until materials reach dry standard.
Thermal imaging cameras help find wet pockets behind walls without tearing everything out, and small weep holes drilled behind the baseboard can dry a wall cavity without full demolition.
Once the structure is dry, the visible repairs start: replacing sagging ceiling drywall, patching and texture matching, new insulation, baseboard, and flooring. Many contractors handle both mitigation and rebuild, so you aren't juggling two companies.
A careful crew matches ceiling texture and paint sheen so the repaired area blends into the rest of the room.
Sewage backups and outside floodwater are Category 3, meaning they carry bacteria and other contaminants. Contractors wear protective gear, remove porous materials like carpet pad and the lower section of drywall, and disinfect every surface the water touched.
Don't try to mop this one yourself, and keep kids and pets out of the area until a professional has cleaned and treated it.

Four steps, usually in the order below. The first one takes about two minutes.
Dial +1-323-329-3586 and tell the dispatcher what happened, where the water is, and whether it's still coming in. If you can safely shut off the main valve or breaker, do it first.
An independent contractor serving your area gets your details and confirms an arrival window. For active leaks and flooding, crews often arrive within the hour.
On site, the contractor traces the source, maps wet areas with meters and a thermal camera, and explains the scope and price before work starts.
The crew extracts water, sets drying equipment, and checks progress every day. Repairs come after the structure is confirmed dry, and the documentation stays with you.
You could search and call contractors one by one at 2 a.m. Here's why people call this line instead.

Contractors in the network quote the job before they start, so you know what extraction, drying, and repairs are expected to cost before you sign off.
Emergency calls jump the queue. Arrival depends on traffic and weather, but crews commonly reach active leaks within roughly an hour.
You get matched with a contractor who serves your area regularly and knows the local housing stock, from slab homes to older basements.
Every contractor is independent and expected to hold proper licensing and insurance. Ask to verify it on arrival, which reputable pros welcome.
Photos, moisture maps, and drying logs give your adjuster the evidence they need, which can speed up a claim.
If a contractor can't make it or isn't the right fit, call back and you'll be routed to another one. You should be matched with someone you're comfortable letting into your property.

Water heater burst at midnight and flooded the laundry room. The crew was there within the hour, extracted everything, and came back daily to check moisture until the drywall read dry.
A supply line under our upstairs sink failed while we were at work, and part of the kitchen ceiling came down. The contractor walked us through the quote before touching anything and took all the photos our insurer wanted.
A sprinkler line broke in one of our suites over a weekend. The crew sealed it off, ran dehumidifiers through Sunday, and the rest of the building opened Monday as usual.
Our basement took water after a heavy storm. The contractor explained it was Category 3 because it came from outside, cut out the bottom two feet of drywall, treated everything, and it's stayed dry since.
We had a musty smell for weeks. The contractor used a thermal camera to find a leak behind the shower wall, opened only what was needed, and repaired the subfloor.
Emergency calls get priority routing, and crews commonly reach the property in roughly an hour. You'll get an arrival window on the phone so you know when to expect them.
Business Leak Detection doesn't charge you anything for the referral. The independent contractor inspects the damage and gives you a quote before starting, so you know the expected cost up front.
Contractors handle emergency extraction, flood pumping, drying setup, sewage and Category 3 cleanup, and temporary protection like tarps, 24 hours a day.
We're a referral line, not a contractor. Every job is performed by an independent professional, and you deal with them directly on pricing and terms.
Sudden and accidental damage, like a burst pipe, is often covered, while gradual leaks and outside flooding may not be. Check your policy; contractors can provide documentation for your claim either way.
Most structures dry in three to five days with professional equipment, though hardwood, plaster, and concrete can take longer. Contractors measure daily rather than guessing.
Stop the source at the main shutoff, kill the breaker for affected rooms if it's safe, lift furniture off wet carpet with foil or blocks, and photograph everything.
Household fans move air at the surface but can't pull moisture out of wall cavities or subfloors. Without dehumidification and moisture readings, materials can look dry and still grow mold.
Under the right conditions, mold growth starts in one to two days. Getting materials dry quickly is the best prevention there is.
Yes. Many contractors in the network handle offices, retail spaces, restaurants, warehouses, and multi-unit buildings, including after-hours work and containment.
It is. Calling and being matched costs nothing; payment is between you and the contractor for the work you approve.
Always. Contractors in the network are independent businesses, so ask for proof of licensing and insurance before work starts. A reputable pro will have it ready.
The network covers single-family homes, apartments, condos, townhomes, and commercial buildings in King County. Whether you're in a downtown high-rise or a house at the edge of the county, calls go to the closest available contractor.
Local knowledge matters here. A contractor who works your area knows whether homes usually sit on slabs, basements, or crawl spaces, and what that means for where water hides.
King County calls cover towns, suburbs, and rural roads. Properties on wells and septic systems are common outside town limits, and contractors who work the county know how those systems affect a water loss.
Because drives across a county can run long, calls are matched by distance first. The nearest available contractor gets the job, which keeps arrival times down for outlying addresses.

Every hour counts on a water loss. Call +1-323-329-3586 and get routed to a licensed, insured independent contractor serving King County.
Reach a dispatcher this minuteCall +1-323-329-3586