When water is coming through a ceiling or spreading across a floor, the first hour decides how much of the building you save. Call +1-323-329-3586 and get connected with a licensed, insured independent water damage contractor who can reach your property in Clark County fast, day or night.


Business Leak Detection is a referral service, not a contractor. We run a 24/7 phone line that connects people dealing with water damage to independent, licensed and insured restoration contractors who work in Clark County. You talk to a real person, describe what happened, and get routed to a pro who handles that kind of job.
The contractors in the network do this work every week: pulling standing water with truck-mounted extractors, setting air movers and dehumidifiers, reading moisture behind baseboards, and cutting out wet drywall before it becomes a mold job. They know a slab leak from a roof leak, and they price the job before they start.
Water damage rarely waits for business hours, so neither does the line. Nights, weekends, and holidays get the same response as a Tuesday morning, and if the first contractor is tied up, the call moves to the next one covering your part of the county.
Not every leak announces itself with a gush. Some of the worst damage starts quietly behind walls and under floors, and if you notice any of the following, it's worth calling today rather than next week.
These are the jobs that come through the line most. You don't need the right term; describe the problem and the call gets routed to someone who handles it.
Standing water keeps soaking into drywall, subfloor, and framing for as long as it sits. Contractors arrive with truck-mounted or portable extraction units, pull water out of carpet and pad, and pump out flooded rooms so drying can start the same day.
Part of that first visit is classifying the loss: clean water from a supply line, gray water from an appliance, or contaminated Category 3 water. That call decides what can be dried in place and what has to go.
Most residential calls trace back to a handful of culprits: a split washer hose, a failed water heater tank, a cracked toilet supply line, or roof flashing that let go. The contractor finds and stops the source, dries what can be dried, and rebuilds what can't.
Good residential pros document everything with photos and moisture readings, which makes the insurance side much easier if you file a claim.
Businesses lose revenue every hour the doors stay shut. Commercial contractors bring bigger equipment, including desiccant dehumidifiers and multiple extraction units, and they'll schedule around your operating hours when the space allows.
Expect containment barriers that keep dust and moisture out of unaffected suites, coordination with your property manager, and the drying logs your adjuster will ask for.
Removing visible water is half the job. Contractors set air movers to push air across wet surfaces and refrigerant or desiccant dehumidifiers to pull moisture out of the air, then check progress daily with moisture meters until materials reach dry standard.
Thermal imaging cameras help find wet pockets behind walls without tearing everything out, and small weep holes drilled behind the baseboard can dry a wall cavity without full demolition.
After drying, the contractor replaces whatever had to come out: ceiling panels, wall sections, insulation, trim, carpet pad, or hardwood. A lot of pros in the network do mitigation and rebuild both, which keeps one crew accountable start to finish.
Ask about texture and paint matching on ceilings and walls; a good repair shouldn't leave a visible patch.
Sewage backups and outside floodwater are Category 3, meaning they carry bacteria and other contaminants. Contractors wear protective gear, remove porous materials like carpet pad and the lower section of drywall, and disinfect every surface the water touched.
Don't try to mop this one yourself, and keep kids and pets out of the area until a professional has cleaned and treated it.

Four steps, usually in the order below. The first one takes about two minutes.
Call +1-323-329-3586. The dispatcher asks a few quick questions about the source, the rooms affected, and whether water is still running, then routes you to an available contractor.
An independent contractor serving your area gets your details and confirms an arrival window. For active leaks and flooding, crews often arrive within the hour.
The contractor finds the source, measures moisture, classifies the water, and walks you through scope and price before starting.
Extraction and drying begin with daily moisture checks. Once materials are dry, repairs follow, and you keep photos and readings for your records or insurer.
You could search and call contractors one by one at 2 a.m. Here's why people call this line instead.

No vague estimates. The contractor explains scope and cost before any work begins, and changes get discussed with you first.
Emergency calls jump the queue. Arrival depends on traffic and weather, but crews commonly reach active leaks within roughly an hour.
Calls are routed to contractors who already work your part of the county, so you aren't waiting on a crew driving in from hours away.
The network is made up of independent contractors who carry the licensing and insurance the work calls for. Ask to see both when they arrive; a good contractor will show you without hesitation.
Photos, moisture maps, and drying logs give your adjuster the evidence they need, which can speed up a claim.
If the first match doesn't work out, call the line again and you'll be connected with a different contractor. A good match is the whole point of the service.

Water heater burst at midnight and flooded the laundry room. The crew was there within the hour, extracted everything, and came back daily to check moisture until the drywall read dry.
We came home to the kitchen ceiling on the floor from an upstairs sink line. The quote was clear before work started, and the documentation made our claim straightforward.
I manage a small office building and a sprinkler head got knocked loose on a Saturday. They put up plastic containment, worked through the weekend, and we opened Monday with only one suite blocked off.
Our basement took water after a heavy storm. The contractor explained it was Category 3 because it came from outside, cut out the bottom two feet of drywall, treated everything, and it's stayed dry since.
We had a musty smell for weeks. The contractor used a thermal camera to find a leak behind the shower wall, opened only what was needed, and repaired the subfloor.
For active leaks and flooding, many contractors in the network arrive within about an hour. Exact timing depends on distance, traffic, and weather, and the dispatcher gives you an estimated window when you call.
Business Leak Detection doesn't charge you anything for the referral. The independent contractor inspects the damage and gives you a quote before starting, so you know the expected cost up front.
Contractors handle emergency extraction, flood pumping, drying setup, sewage and Category 3 cleanup, and temporary protection like tarps, 24 hours a day.
We're a referral line, not a contractor. Every job is performed by an independent professional, and you deal with them directly on pricing and terms.
Sudden and accidental damage, like a burst pipe, is often covered, while gradual leaks and outside flooding may not be. Check your policy; contractors can provide documentation for your claim either way.
Most structures dry in three to five days with professional equipment, though hardwood, plaster, and concrete can take longer. Contractors measure daily rather than guessing.
Stop the source at the main shutoff, kill the breaker for affected rooms if it's safe, lift furniture off wet carpet with foil or blocks, and photograph everything.
Household fans move air at the surface but can't pull moisture out of wall cavities or subfloors. Without dehumidification and moisture readings, materials can look dry and still grow mold.
Under the right conditions, mold growth starts in one to two days. Getting materials dry quickly is the best prevention there is.
Yes. Many contractors in the network handle offices, retail spaces, restaurants, warehouses, and multi-unit buildings, including after-hours work and containment.
Yes. There's no charge to call or to be connected. You only pay the contractor for work you agree to.
Always. Contractors in the network are independent businesses, so ask for proof of licensing and insurance before work starts. A reputable pro will have it ready.
The network covers single-family homes, apartments, condos, townhomes, and commercial buildings in Clark County. Whether you're in a downtown high-rise or a house at the edge of the county, calls go to the closest available contractor.
Local knowledge matters here. A contractor who works your area knows whether homes usually sit on slabs, basements, or crawl spaces, and what that means for where water hides.
Clark County calls cover towns, suburbs, and rural roads. Properties on wells and septic systems are common outside town limits, and contractors who work the county know how those systems affect a water loss.
Travel distances in a county are longer than inside one town, so the line routes each call to whichever contractor sits closest to the property, not just the biggest name in the county.

Every hour counts on a water loss. Call +1-323-329-3586 and get routed to a licensed, insured independent contractor serving Clark County.
Get a contractor routed to youCall +1-323-329-3586