Burst supply line, overflowing toilet, a storm that found the weak spot in your roof: whatever let the water in, the clock started when it did. One call to +1-323-329-3586 routes you to an independent restoration pro in Dexter who takes emergency calls around the clock.
We are a free referral line. Business Leak Detection does not send out its own crews; every call is matched with an independent restoration contractor serving Dexter who carries the license and insurance the work calls for. You explain the problem once, and the right specialist is connected with you.
The contractors in the network do this work every week: pulling standing water with truck-mounted extractors, setting air movers and dehumidifiers, reading moisture behind baseboards, and cutting out wet drywall before it becomes a mold job. They know a slab leak from a roof leak, and they price the job before they start.
The line is staffed around the clock because leaks don't keep office hours. A pipe that splits at 3 a.m. on a holiday weekend gets the same routing as one that splits at noon, and if one contractor is busy, you're moved to another who covers your corner of the city.
Not every leak announces itself with a gush. Some of the worst damage starts quietly behind walls and under floors, and if you notice any of the following, it's worth calling today rather than next week.
Below is the work contractors in the network handle most often. Tell the dispatcher which one fits, or just describe what you're seeing and they'll sort it out.
The longer water stands, the deeper it wicks into walls and framing. Crews show up with truck-mount extractors, submersible pumps, and weighted extraction tools that squeeze water out of carpet and pad, so the drying phase starts hours sooner.
Before extraction, the contractor classifies the water as Category 1, 2, or 3 based on its source, because clean supply-line water and sewage backflow get handled very differently.
Homes take water from washing machine hoses, water heater failures, toilet supply lines, ice maker lines, and roof leaks. Residential contractors find the source, stop it, dry the structure, and then replace what can't be saved: drywall, baseboard, insulation, and flooring.
Good residential pros document everything with photos and moisture readings, which makes the insurance side much easier if you file a claim.
Businesses lose revenue every hour the doors stay shut. Commercial contractors bring bigger equipment, including desiccant dehumidifiers and multiple extraction units, and they'll schedule around your operating hours when the space allows.
Expect containment barriers that keep dust and moisture out of unaffected suites, coordination with your property manager, and the drying logs your adjuster will ask for.
Removing visible water is half the job. Contractors set air movers to push air across wet surfaces and refrigerant or desiccant dehumidifiers to pull moisture out of the air, then check progress daily with moisture meters until materials reach dry standard.
Thermal imaging cameras help find wet pockets behind walls without tearing everything out, and small weep holes drilled behind the baseboard can dry a wall cavity without full demolition.
After drying, the contractor replaces whatever had to come out: ceiling panels, wall sections, insulation, trim, carpet pad, or hardwood. A lot of pros in the network do mitigation and rebuild both, which keeps one crew accountable start to finish.
Ask about texture and paint matching on ceilings and walls; a good repair shouldn't leave a visible patch.
Sewage backups and outside floodwater are Category 3, meaning they carry bacteria and other contaminants. Contractors wear protective gear, remove porous materials like carpet pad and the lower section of drywall, and disinfect every surface the water touched.
Don't try to mop this one yourself, and keep kids and pets out of the area until a professional has cleaned and treated it.
Four steps, usually in the order below. The first one takes about two minutes.
Dial +1-323-329-3586 and tell the dispatcher what happened, where the water is, and whether it's still coming in. If you can safely shut off the main valve or breaker, do it first.
Your call goes to an independent restoration contractor nearby who confirms an arrival time. Emergency calls get priority, and many crews reach the property in about an hour.
On site, the contractor traces the source, maps wet areas with meters and a thermal camera, and explains the scope and price before work starts.
Extraction and drying begin with daily moisture checks. Once materials are dry, repairs follow, and you keep photos and readings for your records or insurer.
There are plenty of names in a search result. These are the reasons people come back to this line when water shows up.
No vague estimates. The contractor explains scope and cost before any work begins, and changes get discussed with you first.
Emergency calls jump the queue. Arrival depends on traffic and weather, but crews commonly reach active leaks within roughly an hour.
You get matched with a contractor who serves your area regularly and knows the local housing stock, from slab homes to older basements.
Every contractor is independent and expected to hold proper licensing and insurance. Ask to verify it on arrival, which reputable pros welcome.
Contractors record photos, moisture readings, and equipment logs throughout the job, the same records insurance adjusters ask for.
If the first match doesn't work out, call the line again and you'll be connected with a different contractor. A good match is the whole point of the service.
Our water heater let go in the garage around midnight and ran into the laundry room. The contractor showed up in under an hour, had the water out by 2 a.m., and set fans and a dehumidifier. He showed me the moisture readings every day until it was dry.
A supply line under our upstairs sink failed while we were at work, and part of the kitchen ceiling came down. The contractor walked us through the quote before touching anything and took all the photos our insurer wanted.
I manage a small office building and a sprinkler head got knocked loose on a Saturday. They put up plastic containment, worked through the weekend, and we opened Monday with only one suite blocked off.
After a storm flooded our basement, the contractor explained why the floodwater counted as contaminated, removed the lower drywall and carpet, disinfected, and dried it out properly.
We had a musty smell for weeks. The contractor used a thermal camera to find a leak behind the shower wall, opened only what was needed, and repaired the subfloor.
For active leaks and flooding, many contractors in the network arrive within about an hour. Exact timing depends on distance, traffic, and weather, and the dispatcher gives you an estimated window when you call.
Business Leak Detection doesn't charge you anything for the referral. The independent contractor inspects the damage and gives you a quote before starting, so you know the expected cost up front.
Water extraction, emergency pumping, board-up and tarping after storms, structural drying, sewage cleanup, and leak source location are all handled around the clock.
We're a referral line, not a contractor. Every job is performed by an independent professional, and you deal with them directly on pricing and terms.
It depends on the cause. Policies usually cover sudden events like a split supply line but often exclude slow leaks and floodwater without separate flood coverage. The contractor's photos and moisture logs help either way.
Most structures dry in three to five days with professional equipment, though hardwood, plaster, and concrete can take longer. Contractors measure daily rather than guessing.
Stop the source at the main shutoff, kill the breaker for affected rooms if it's safe, lift furniture off wet carpet with foil or blocks, and photograph everything.
Box fans help a little with the surface, but they don't reach water trapped behind drywall or under flooring. That hidden moisture is where mold starts.
Mold can begin growing within 24 to 48 hours on wet drywall, carpet pad, and wood, which is why fast extraction and drying matter so much.
They do. Commercial calls for offices, stores, restaurants, and apartment buildings are routed to contractors with the larger equipment and crews those jobs need.
Yes. There's no charge to call or to be connected. You only pay the contractor for work you agree to.
Yes, and you should. Every contractor is independent, and checking license and insurance before they begin protects you.
Calls come in from houses, condos, rental units, and businesses in Dexter, and each one goes to an independent contractor who already works that area. Distance and availability decide who gets the call, so you aren't waiting on someone from across the city.
Local knowledge matters here. A contractor who works your area knows whether homes usually sit on slabs, basements, or crawl spaces, and what that means for where water hides.
From older neighborhoods with original galvanized plumbing to newer subdivisions with PEX lines, Dexter has a mix of housing that fails in different ways. Contractors who work here every week know which streets flood first in a heavy storm.
Contractors cover zip codes in and around Dexter, including 48130.
The faster drying starts, the less you end up replacing. One call to +1-323-329-3586 connects you with an independent local pro, any hour.
Call now and get help tonightCall +1-323-329-3586