Burst supply line, overflowing toilet, a storm that found the weak spot in your roof: whatever let the water in, the clock started when it did. One call to +1-323-329-3586 routes you to an independent restoration pro in Ector County who takes emergency calls around the clock.


We are a free referral line. Business Leak Detection does not send out its own crews; every call is matched with an independent restoration contractor serving Ector County who carries the license and insurance the work calls for. You explain the problem once, and the right specialist is connected with you.
The contractors in the network do this work every week: pulling standing water with truck-mounted extractors, setting air movers and dehumidifiers, reading moisture behind baseboards, and cutting out wet drywall before it becomes a mold job. They know a slab leak from a roof leak, and they price the job before they start.
The line is staffed around the clock because leaks don't keep office hours. A pipe that splits at 3 a.m. on a holiday weekend gets the same routing as one that splits at noon, and if one contractor is busy, you're moved to another who covers your corner of the county.
Not every leak announces itself with a gush. Some of the worst damage starts quietly behind walls and under floors, and if you notice any of the following, it's worth calling today rather than next week.
Below is the work contractors in the network handle most often. Tell the dispatcher which one fits, or just describe what you're seeing and they'll sort it out.
The longer water stands, the deeper it wicks into walls and framing. Crews show up with truck-mount extractors, submersible pumps, and weighted extraction tools that squeeze water out of carpet and pad, so the drying phase starts hours sooner.
Before extraction, the contractor classifies the water as Category 1, 2, or 3 based on its source, because clean supply-line water and sewage backflow get handled very differently.
Homes take water from washing machine hoses, water heater failures, toilet supply lines, ice maker lines, and roof leaks. Residential contractors find the source, stop it, dry the structure, and then replace what can't be saved: drywall, baseboard, insulation, and flooring.
Good residential pros document everything with photos and moisture readings, which makes the insurance side much easier if you file a claim.
Businesses lose revenue every hour the doors stay shut. Commercial contractors bring bigger equipment, including desiccant dehumidifiers and multiple extraction units, and they'll schedule around your operating hours when the space allows.
They're used to working with property managers, building engineers, and multiple tenants, and they section off affected areas with containment so the rest of the building keeps running.
Removing visible water is half the job. Contractors set air movers to push air across wet surfaces and refrigerant or desiccant dehumidifiers to pull moisture out of the air, then check progress daily with moisture meters until materials reach dry standard.
Thermal imaging cameras help find wet pockets behind walls without tearing everything out, and small weep holes drilled behind the baseboard can dry a wall cavity without full demolition.
Once the structure is dry, the visible repairs start: replacing sagging ceiling drywall, patching and texture matching, new insulation, baseboard, and flooring. Many contractors handle both mitigation and rebuild, so you aren't juggling two companies.
Ask about texture and paint matching on ceilings and walls; a good repair shouldn't leave a visible patch.
Sewage backups and outside floodwater are Category 3, meaning they carry bacteria and other contaminants. Contractors wear protective gear, remove porous materials like carpet pad and the lower section of drywall, and disinfect every surface the water touched.
Keep everyone, especially children and pets, away from the affected area until it has been cleaned and disinfected by a pro.

Here's what to expect from the moment you call until the job wraps up.
Call +1-323-329-3586. The dispatcher asks a few quick questions about the source, the rooms affected, and whether water is still running, then routes you to an available contractor.
An independent contractor serving your area gets your details and confirms an arrival window. For active leaks and flooding, crews often arrive within the hour.
On site, the contractor traces the source, maps wet areas with meters and a thermal camera, and explains the scope and price before work starts.
Extraction and drying begin with daily moisture checks. Once materials are dry, repairs follow, and you keep photos and readings for your records or insurer.
There are plenty of names in a search result. These are the reasons people come back to this line when water shows up.

No vague estimates. The contractor explains scope and cost before any work begins, and changes get discussed with you first.
Active leaks and flooding get priority routing, and many contractors reach emergency calls in about an hour depending on distance and conditions.
Calls are routed to contractors who already work your part of the county, so you aren't waiting on a crew driving in from hours away.
The network is made up of independent contractors who carry the licensing and insurance the work calls for. Ask to see both when they arrive; a good contractor will show you without hesitation.
Photos, moisture maps, and drying logs give your adjuster the evidence they need, which can speed up a claim.
If a contractor can't make it or isn't the right fit, call back and you'll be routed to another one. You should be matched with someone you're comfortable letting into your property.

Our water heater let go in the garage around midnight and ran into the laundry room. The contractor showed up in under an hour, had the water out by 2 a.m., and set fans and a dehumidifier. He showed me the moisture readings every day until it was dry.
A supply line under our upstairs sink failed while we were at work, and part of the kitchen ceiling came down. The contractor walked us through the quote before touching anything and took all the photos our insurer wanted.
A sprinkler line broke in one of our suites over a weekend. The crew sealed it off, ran dehumidifiers through Sunday, and the rest of the building opened Monday as usual.
After a storm flooded our basement, the contractor explained why the floodwater counted as contaminated, removed the lower drywall and carpet, disinfected, and dried it out properly.
A slow leak behind the shower had been rotting the subfloor for months. They found it with a thermal camera without tearing up the whole bathroom, dried it, and replaced the damaged section.
Emergency calls get priority routing, and crews commonly reach the property in roughly an hour. You'll get an arrival window on the phone so you know when to expect them.
The call itself is free. Pricing comes from the contractor, who assesses the job and explains the cost before any work begins.
Contractors handle emergency extraction, flood pumping, drying setup, sewage and Category 3 cleanup, and temporary protection like tarps, 24 hours a day.
We're a referral line, not a contractor. Every job is performed by an independent professional, and you deal with them directly on pricing and terms.
Sudden and accidental damage, like a burst pipe, is often covered, while gradual leaks and outside flooding may not be. Check your policy; contractors can provide documentation for your claim either way.
Typical drying runs about three to five days. Dense materials like hardwood and concrete slabs can need more time, which is why moisture readings, not the calendar, decide when it's done.
Stop the source at the main shutoff, kill the breaker for affected rooms if it's safe, lift furniture off wet carpet with foil or blocks, and photograph everything.
Household fans move air at the surface but can't pull moisture out of wall cavities or subfloors. Without dehumidification and moisture readings, materials can look dry and still grow mold.
Under the right conditions, mold growth starts in one to two days. Getting materials dry quickly is the best prevention there is.
They do. Commercial calls for offices, stores, restaurants, and apartment buildings are routed to contractors with the larger equipment and crews those jobs need.
It is. Calling and being matched costs nothing; payment is between you and the contractor for the work you approve.
Always. Contractors in the network are independent businesses, so ask for proof of licensing and insurance before work starts. A reputable pro will have it ready.
The network covers single-family homes, apartments, condos, townhomes, and commercial buildings in Ector County. Whether you're in a downtown high-rise or a house at the edge of the county, calls go to the closest available contractor.
Water damage looks different depending on the building. Older homes with plaster walls and crawl spaces dry differently than newer slab construction, and contractors familiar with local building styles know what to check first.
From the county seat out to unincorporated areas, contractors serving Ector County respond to homes, farms, and businesses alike. Rural properties on wells and septic systems get the same routing as in-town addresses.
Because drives across a county can run long, calls are matched by distance first. The nearest available contractor gets the job, which keeps arrival times down for outlying addresses.

Every hour counts on a water loss. Call +1-323-329-3586 and get routed to a licensed, insured independent contractor serving Ector County.
Reach a dispatcher this minuteCall +1-323-329-3586