Burst supply line, overflowing toilet, a storm that found the weak spot in your roof: whatever let the water in, the clock started when it did. One call to +1-323-329-3586 routes you to an independent restoration pro in Hillsborough County who takes emergency calls around the clock.


We are a free referral line. Business Leak Detection does not send out its own crews; every call is matched with an independent restoration contractor serving Hillsborough County who carries the license and insurance the work calls for. You explain the problem once, and the right specialist is connected with you.
Most of the pros callers reach have spent years on water losses of every size, from one soaked closet to a flooded office floor. They carry moisture meters and thermal cameras, run commercial drying equipment, and keep drying logs an insurance adjuster can actually read. You get a quote before work begins, not a surprise afterward.
Water damage rarely waits for business hours, so neither does the line. Nights, weekends, and holidays get the same response as a Tuesday morning, and if the first contractor is tied up, the call moves to the next one covering your part of the county.
Water does its worst work where nobody is looking. These are the signs restoration contractors say people tend to ignore until the repair bill doubles.
These are the jobs that come through the line most. You don't need the right term; describe the problem and the call gets routed to someone who handles it.
Standing water keeps soaking into drywall, subfloor, and framing for as long as it sits. Contractors arrive with truck-mounted or portable extraction units, pull water out of carpet and pad, and pump out flooded rooms so drying can start the same day.
Part of that first visit is classifying the loss: clean water from a supply line, gray water from an appliance, or contaminated Category 3 water. That call decides what can be dried in place and what has to go.
Most residential calls trace back to a handful of culprits: a split washer hose, a failed water heater tank, a cracked toilet supply line, or roof flashing that let go. The contractor finds and stops the source, dries what can be dried, and rebuilds what can't.
Good residential pros document everything with photos and moisture readings, which makes the insurance side much easier if you file a claim.
Businesses lose revenue every hour the doors stay shut. Commercial contractors bring bigger equipment, including desiccant dehumidifiers and multiple extraction units, and they'll schedule around your operating hours when the space allows.
Expect containment barriers that keep dust and moisture out of unaffected suites, coordination with your property manager, and the drying logs your adjuster will ask for.
Removing visible water is half the job. Contractors set air movers to push air across wet surfaces and refrigerant or desiccant dehumidifiers to pull moisture out of the air, then check progress daily with moisture meters until materials reach dry standard.
Thermal imaging cameras help find wet pockets behind walls without tearing everything out, and small weep holes drilled behind the baseboard can dry a wall cavity without full demolition.
After drying, the contractor replaces whatever had to come out: ceiling panels, wall sections, insulation, trim, carpet pad, or hardwood. A lot of pros in the network do mitigation and rebuild both, which keeps one crew accountable start to finish.
Ask about texture and paint matching on ceilings and walls; a good repair shouldn't leave a visible patch.
Water from a sewer backup or rising floodwater is treated as contaminated. Crews suit up in protective gear, tear out porous materials that can't be cleaned, apply antimicrobial treatment, and dry the space under containment.
Keep everyone, especially children and pets, away from the affected area until it has been cleaned and disinfected by a pro.

Four steps, usually in the order below. The first one takes about two minutes.
Call +1-323-329-3586. The dispatcher asks a few quick questions about the source, the rooms affected, and whether water is still running, then routes you to an available contractor.
An independent contractor serving your area gets your details and confirms an arrival window. For active leaks and flooding, crews often arrive within the hour.
The contractor finds the source, measures moisture, classifies the water, and walks you through scope and price before starting.
Extraction and drying begin with daily moisture checks. Once materials are dry, repairs follow, and you keep photos and readings for your records or insurer.
You could search and call contractors one by one at 2 a.m. Here's why people call this line instead.

No vague estimates. The contractor explains scope and cost before any work begins, and changes get discussed with you first.
Active leaks and flooding get priority routing, and many contractors reach emergency calls in about an hour depending on distance and conditions.
Calls are routed to contractors who already work your part of the county, so you aren't waiting on a crew driving in from hours away.
Every contractor is independent and expected to hold proper licensing and insurance. Ask to verify it on arrival, which reputable pros welcome.
Contractors record photos, moisture readings, and equipment logs throughout the job, the same records insurance adjusters ask for.
If a contractor can't make it or isn't the right fit, call back and you'll be routed to another one. You should be matched with someone you're comfortable letting into your property.

Water heater burst at midnight and flooded the laundry room. The crew was there within the hour, extracted everything, and came back daily to check moisture until the drywall read dry.
A supply line under our upstairs sink failed while we were at work, and part of the kitchen ceiling came down. The contractor walked us through the quote before touching anything and took all the photos our insurer wanted.
I manage a small office building and a sprinkler head got knocked loose on a Saturday. They put up plastic containment, worked through the weekend, and we opened Monday with only one suite blocked off.
After a storm flooded our basement, the contractor explained why the floodwater counted as contaminated, removed the lower drywall and carpet, disinfected, and dried it out properly.
A slow leak behind the shower had been rotting the subfloor for months. They found it with a thermal camera without tearing up the whole bathroom, dried it, and replaced the damaged section.
Emergency calls get priority routing, and crews commonly reach the property in roughly an hour. You'll get an arrival window on the phone so you know when to expect them.
The call itself is free. Pricing comes from the contractor, who assesses the job and explains the cost before any work begins.
Contractors handle emergency extraction, flood pumping, drying setup, sewage and Category 3 cleanup, and temporary protection like tarps, 24 hours a day.
No. Business Leak Detection is a free referral service. The work is done by independent local contractors, and you agree on price and scope directly with them.
Sudden and accidental damage, like a burst pipe, is often covered, while gradual leaks and outside flooding may not be. Check your policy; contractors can provide documentation for your claim either way.
Typical drying runs about three to five days. Dense materials like hardwood and concrete slabs can need more time, which is why moisture readings, not the calendar, decide when it's done.
Stop the source at the main shutoff, kill the breaker for affected rooms if it's safe, lift furniture off wet carpet with foil or blocks, and photograph everything.
Box fans help a little with the surface, but they don't reach water trapped behind drywall or under flooring. That hidden moisture is where mold starts.
Under the right conditions, mold growth starts in one to two days. Getting materials dry quickly is the best prevention there is.
They do. Commercial calls for offices, stores, restaurants, and apartment buildings are routed to contractors with the larger equipment and crews those jobs need.
It is. Calling and being matched costs nothing; payment is between you and the contractor for the work you approve.
Yes, and you should. Every contractor is independent, and checking license and insurance before they begin protects you.
The network covers single-family homes, apartments, condos, townhomes, and commercial buildings in Hillsborough County. Whether you're in a downtown high-rise or a house at the edge of the county, calls go to the closest available contractor.
Water damage looks different depending on the building. Older homes with plaster walls and crawl spaces dry differently than newer slab construction, and contractors familiar with local building styles know what to check first.
Hillsborough County calls cover towns, suburbs, and rural roads. Properties on wells and septic systems are common outside town limits, and contractors who work the county know how those systems affect a water loss.
Travel distances in a county are longer than inside one town, so the line routes each call to whichever contractor sits closest to the property, not just the biggest name in the county.

Every hour counts on a water loss. Call +1-323-329-3586 and get routed to a licensed, insured independent contractor serving Hillsborough County.
Get a contractor routed to youCall +1-323-329-3586