Burst supply line, overflowing toilet, a storm that found the weak spot in your roof: whatever let the water in, the clock started when it did. One call to +1-323-329-3586 routes you to an independent restoration pro in Ellis County who takes emergency calls around the clock.
We are a free referral line. Business Leak Detection does not send out its own crews; every call is matched with an independent restoration contractor serving Ellis County who carries the license and insurance the work calls for. You explain the problem once, and the right specialist is connected with you.
The contractors in the network do this work every week: pulling standing water with truck-mounted extractors, setting air movers and dehumidifiers, reading moisture behind baseboards, and cutting out wet drywall before it becomes a mold job. They know a slab leak from a roof leak, and they price the job before they start.
Water damage rarely waits for business hours, so neither does the line. Nights, weekends, and holidays get the same response as a Tuesday morning, and if the first contractor is tied up, the call moves to the next one covering your part of the county.
Not every leak announces itself with a gush. Some of the worst damage starts quietly behind walls and under floors, and if you notice any of the following, it's worth calling today rather than next week.
Below is the work contractors in the network handle most often. Tell the dispatcher which one fits, or just describe what you're seeing and they'll sort it out.
Standing water keeps soaking into drywall, subfloor, and framing for as long as it sits. Contractors arrive with truck-mounted or portable extraction units, pull water out of carpet and pad, and pump out flooded rooms so drying can start the same day.
Before extraction, the contractor classifies the water as Category 1, 2, or 3 based on its source, because clean supply-line water and sewage backflow get handled very differently.
Most residential calls trace back to a handful of culprits: a split washer hose, a failed water heater tank, a cracked toilet supply line, or roof flashing that let go. The contractor finds and stops the source, dries what can be dried, and rebuilds what can't.
They'll photograph the damage, log readings room by room, and hand you paperwork your insurer can use if you decide to file.
Businesses lose revenue every hour the doors stay shut. Commercial contractors bring bigger equipment, including desiccant dehumidifiers and multiple extraction units, and they'll schedule around your operating hours when the space allows.
They're used to working with property managers, building engineers, and multiple tenants, and they section off affected areas with containment so the rest of the building keeps running.
Removing visible water is half the job. Contractors set air movers to push air across wet surfaces and refrigerant or desiccant dehumidifiers to pull moisture out of the air, then check progress daily with moisture meters until materials reach dry standard.
Thermal imaging cameras help find wet pockets behind walls without tearing everything out, and small weep holes drilled behind the baseboard can dry a wall cavity without full demolition.
Once the structure is dry, the visible repairs start: replacing sagging ceiling drywall, patching and texture matching, new insulation, baseboard, and flooring. Many contractors handle both mitigation and rebuild, so you aren't juggling two companies.
A careful crew matches ceiling texture and paint sheen so the repaired area blends into the rest of the room.
Water from a sewer backup or rising floodwater is treated as contaminated. Crews suit up in protective gear, tear out porous materials that can't be cleaned, apply antimicrobial treatment, and dry the space under containment.
Don't try to mop this one yourself, and keep kids and pets out of the area until a professional has cleaned and treated it.
Here's what to expect from the moment you call until the job wraps up.
Dial +1-323-329-3586 and tell the dispatcher what happened, where the water is, and whether it's still coming in. If you can safely shut off the main valve or breaker, do it first.
An independent contractor serving your area gets your details and confirms an arrival window. For active leaks and flooding, crews often arrive within the hour.
The contractor finds the source, measures moisture, classifies the water, and walks you through scope and price before starting.
Extraction and drying begin with daily moisture checks. Once materials are dry, repairs follow, and you keep photos and readings for your records or insurer.
You could search and call contractors one by one at 2 a.m. Here's why people call this line instead.
No vague estimates. The contractor explains scope and cost before any work begins, and changes get discussed with you first.
Active leaks and flooding get priority routing, and many contractors reach emergency calls in about an hour depending on distance and conditions.
You get matched with a contractor who serves your area regularly and knows the local housing stock, from slab homes to older basements.
The network is made up of independent contractors who carry the licensing and insurance the work calls for. Ask to see both when they arrive; a good contractor will show you without hesitation.
Contractors record photos, moisture readings, and equipment logs throughout the job, the same records insurance adjusters ask for.
If the first match doesn't work out, call the line again and you'll be connected with a different contractor. A good match is the whole point of the service.
Our water heater let go in the garage around midnight and ran into the laundry room. The contractor showed up in under an hour, had the water out by 2 a.m., and set fans and a dehumidifier. He showed me the moisture readings every day until it was dry.
A supply line under our upstairs sink failed while we were at work, and part of the kitchen ceiling came down. The contractor walked us through the quote before touching anything and took all the photos our insurer wanted.
A sprinkler line broke in one of our suites over a weekend. The crew sealed it off, ran dehumidifiers through Sunday, and the rest of the building opened Monday as usual.
Our basement took water after a heavy storm. The contractor explained it was Category 3 because it came from outside, cut out the bottom two feet of drywall, treated everything, and it's stayed dry since.
We had a musty smell for weeks. The contractor used a thermal camera to find a leak behind the shower wall, opened only what was needed, and repaired the subfloor.
Emergency calls get priority routing, and crews commonly reach the property in roughly an hour. You'll get an arrival window on the phone so you know when to expect them.
The call itself is free. Pricing comes from the contractor, who assesses the job and explains the cost before any work begins.
Water extraction, emergency pumping, board-up and tarping after storms, structural drying, sewage cleanup, and leak source location are all handled around the clock.
We're a referral line, not a contractor. Every job is performed by an independent professional, and you deal with them directly on pricing and terms.
It depends on the cause. Policies usually cover sudden events like a split supply line but often exclude slow leaks and floodwater without separate flood coverage. The contractor's photos and moisture logs help either way.
Most structures dry in three to five days with professional equipment, though hardwood, plaster, and concrete can take longer. Contractors measure daily rather than guessing.
Stop the source at the main shutoff, kill the breaker for affected rooms if it's safe, lift furniture off wet carpet with foil or blocks, and photograph everything.
Household fans move air at the surface but can't pull moisture out of wall cavities or subfloors. Without dehumidification and moisture readings, materials can look dry and still grow mold.
Under the right conditions, mold growth starts in one to two days. Getting materials dry quickly is the best prevention there is.
They do. Commercial calls for offices, stores, restaurants, and apartment buildings are routed to contractors with the larger equipment and crews those jobs need.
It is. Calling and being matched costs nothing; payment is between you and the contractor for the work you approve.
Yes, and you should. Every contractor is independent, and checking license and insurance before they begin protects you.
The network covers single-family homes, apartments, condos, townhomes, and commercial buildings in Ellis County. Whether you're in a downtown high-rise or a house at the edge of the county, calls go to the closest available contractor.
Water damage looks different depending on the building. Older homes with plaster walls and crawl spaces dry differently than newer slab construction, and contractors familiar with local building styles know what to check first.
Ellis County calls cover towns, suburbs, and rural roads. Properties on wells and septic systems are common outside town limits, and contractors who work the county know how those systems affect a water loss.
Because drives across a county can run long, calls are matched by distance first. The nearest available contractor gets the job, which keeps arrival times down for outlying addresses.
The faster drying starts, the less you end up replacing. One call to +1-323-329-3586 connects you with an independent local pro, any hour.
Get a contractor routed to youCall +1-323-329-3586