Burst supply line, overflowing toilet, a storm that found the weak spot in your roof: whatever let the water in, the clock started when it did. One call to +1-323-329-3586 routes you to an independent restoration pro in Clark County who takes emergency calls around the clock.


Business Leak Detection is a referral service, not a contractor. We run a 24/7 phone line that connects people dealing with water damage to independent, licensed and insured restoration contractors who work in Clark County. You talk to a real person, describe what happened, and get routed to a pro who handles that kind of job.
Most of the pros callers reach have spent years on water losses of every size, from one soaked closet to a flooded office floor. They carry moisture meters and thermal cameras, run commercial drying equipment, and keep drying logs an insurance adjuster can actually read. You get a quote before work begins, not a surprise afterward.
Water damage rarely waits for business hours, so neither does the line. Nights, weekends, and holidays get the same response as a Tuesday morning, and if the first contractor is tied up, the call moves to the next one covering your part of the county.
Water does its worst work where nobody is looking. These are the signs restoration contractors say people tend to ignore until the repair bill doubles.
Below is the work contractors in the network handle most often. Tell the dispatcher which one fits, or just describe what you're seeing and they'll sort it out.
The longer water stands, the deeper it wicks into walls and framing. Crews show up with truck-mount extractors, submersible pumps, and weighted extraction tools that squeeze water out of carpet and pad, so the drying phase starts hours sooner.
Before extraction, the contractor classifies the water as Category 1, 2, or 3 based on its source, because clean supply-line water and sewage backflow get handled very differently.
Homes take water from washing machine hoses, water heater failures, toilet supply lines, ice maker lines, and roof leaks. Residential contractors find the source, stop it, dry the structure, and then replace what can't be saved: drywall, baseboard, insulation, and flooring.
They'll photograph the damage, log readings room by room, and hand you paperwork your insurer can use if you decide to file.
A flooded office, retail floor, or restaurant kitchen costs money every hour it stays closed. Commercial restoration contractors scale up with more extractors, larger desiccant dehumidifiers, and crews that can work after hours so you can stay partly open.
They're used to working with property managers, building engineers, and multiple tenants, and they section off affected areas with containment so the rest of the building keeps running.
Removing visible water is half the job. Contractors set air movers to push air across wet surfaces and refrigerant or desiccant dehumidifiers to pull moisture out of the air, then check progress daily with moisture meters until materials reach dry standard.
Infrared cameras spot cold, wet areas inside walls, and drilling small holes behind the baseboard lets air into the cavity so it dries without being gutted.
Once the structure is dry, the visible repairs start: replacing sagging ceiling drywall, patching and texture matching, new insulation, baseboard, and flooring. Many contractors handle both mitigation and rebuild, so you aren't juggling two companies.
A careful crew matches ceiling texture and paint sheen so the repaired area blends into the rest of the room.
Water from a sewer backup or rising floodwater is treated as contaminated. Crews suit up in protective gear, tear out porous materials that can't be cleaned, apply antimicrobial treatment, and dry the space under containment.
Don't try to mop this one yourself, and keep kids and pets out of the area until a professional has cleaned and treated it.

Four steps, usually in the order below. The first one takes about two minutes.
Dial +1-323-329-3586 and tell the dispatcher what happened, where the water is, and whether it's still coming in. If you can safely shut off the main valve or breaker, do it first.
An independent contractor serving your area gets your details and confirms an arrival window. For active leaks and flooding, crews often arrive within the hour.
On site, the contractor traces the source, maps wet areas with meters and a thermal camera, and explains the scope and price before work starts.
The crew extracts water, sets drying equipment, and checks progress every day. Repairs come after the structure is confirmed dry, and the documentation stays with you.
You could search and call contractors one by one at 2 a.m. Here's why people call this line instead.

Contractors in the network quote the job before they start, so you know what extraction, drying, and repairs are expected to cost before you sign off.
Emergency calls jump the queue. Arrival depends on traffic and weather, but crews commonly reach active leaks within roughly an hour.
You get matched with a contractor who serves your area regularly and knows the local housing stock, from slab homes to older basements.
Every contractor is independent and expected to hold proper licensing and insurance. Ask to verify it on arrival, which reputable pros welcome.
Contractors record photos, moisture readings, and equipment logs throughout the job, the same records insurance adjusters ask for.
If the first match doesn't work out, call the line again and you'll be connected with a different contractor. A good match is the whole point of the service.

Water heater burst at midnight and flooded the laundry room. The crew was there within the hour, extracted everything, and came back daily to check moisture until the drywall read dry.
We came home to the kitchen ceiling on the floor from an upstairs sink line. The quote was clear before work started, and the documentation made our claim straightforward.
I manage a small office building and a sprinkler head got knocked loose on a Saturday. They put up plastic containment, worked through the weekend, and we opened Monday with only one suite blocked off.
Our basement took water after a heavy storm. The contractor explained it was Category 3 because it came from outside, cut out the bottom two feet of drywall, treated everything, and it's stayed dry since.
A slow leak behind the shower had been rotting the subfloor for months. They found it with a thermal camera without tearing up the whole bathroom, dried it, and replaced the damaged section.
Emergency calls get priority routing, and crews commonly reach the property in roughly an hour. You'll get an arrival window on the phone so you know when to expect them.
Business Leak Detection doesn't charge you anything for the referral. The independent contractor inspects the damage and gives you a quote before starting, so you know the expected cost up front.
Contractors handle emergency extraction, flood pumping, drying setup, sewage and Category 3 cleanup, and temporary protection like tarps, 24 hours a day.
We're a referral line, not a contractor. Every job is performed by an independent professional, and you deal with them directly on pricing and terms.
Sudden and accidental damage, like a burst pipe, is often covered, while gradual leaks and outside flooding may not be. Check your policy; contractors can provide documentation for your claim either way.
Typical drying runs about three to five days. Dense materials like hardwood and concrete slabs can need more time, which is why moisture readings, not the calendar, decide when it's done.
Stop the source at the main shutoff, kill the breaker for affected rooms if it's safe, lift furniture off wet carpet with foil or blocks, and photograph everything.
Box fans help a little with the surface, but they don't reach water trapped behind drywall or under flooring. That hidden moisture is where mold starts.
Under the right conditions, mold growth starts in one to two days. Getting materials dry quickly is the best prevention there is.
Yes. Many contractors in the network handle offices, retail spaces, restaurants, warehouses, and multi-unit buildings, including after-hours work and containment.
It is. Calling and being matched costs nothing; payment is between you and the contractor for the work you approve.
Yes, and you should. Every contractor is independent, and checking license and insurance before they begin protects you.
Calls come in from houses, condos, rental units, and businesses in Clark County, and each one goes to an independent contractor who already works that area. Distance and availability decide who gets the call, so you aren't waiting on someone from across the county.
Local knowledge matters here. A contractor who works your area knows whether homes usually sit on slabs, basements, or crawl spaces, and what that means for where water hides.
Clark County calls cover towns, suburbs, and rural roads. Properties on wells and septic systems are common outside town limits, and contractors who work the county know how those systems affect a water loss.
Because drives across a county can run long, calls are matched by distance first. The nearest available contractor gets the job, which keeps arrival times down for outlying addresses.

Every hour counts on a water loss. Call +1-323-329-3586 and get routed to a licensed, insured independent contractor serving Clark County.
Get a contractor routed to youCall +1-323-329-3586