Burst supply line, overflowing toilet, a storm that found the weak spot in your roof: whatever let the water in, the clock started when it did. One call to +1-323-329-3586 routes you to an independent restoration pro in Dane County who takes emergency calls around the clock.
Business Leak Detection is a referral service, not a contractor. We run a 24/7 phone line that connects people dealing with water damage to independent, licensed and insured restoration contractors who work in Dane County. You talk to a real person, describe what happened, and get routed to a pro who handles that kind of job.
Most of the pros callers reach have spent years on water losses of every size, from one soaked closet to a flooded office floor. They carry moisture meters and thermal cameras, run commercial drying equipment, and keep drying logs an insurance adjuster can actually read. You get a quote before work begins, not a surprise afterward.
Water damage rarely waits for business hours, so neither does the line. Nights, weekends, and holidays get the same response as a Tuesday morning, and if the first contractor is tied up, the call moves to the next one covering your part of the county.
Not every leak announces itself with a gush. Some of the worst damage starts quietly behind walls and under floors, and if you notice any of the following, it's worth calling today rather than next week.
Below is the work contractors in the network handle most often. Tell the dispatcher which one fits, or just describe what you're seeing and they'll sort it out.
Standing water keeps soaking into drywall, subfloor, and framing for as long as it sits. Contractors arrive with truck-mounted or portable extraction units, pull water out of carpet and pad, and pump out flooded rooms so drying can start the same day.
Before extraction, the contractor classifies the water as Category 1, 2, or 3 based on its source, because clean supply-line water and sewage backflow get handled very differently.
Homes take water from washing machine hoses, water heater failures, toilet supply lines, ice maker lines, and roof leaks. Residential contractors find the source, stop it, dry the structure, and then replace what can't be saved: drywall, baseboard, insulation, and flooring.
Good residential pros document everything with photos and moisture readings, which makes the insurance side much easier if you file a claim.
Businesses lose revenue every hour the doors stay shut. Commercial contractors bring bigger equipment, including desiccant dehumidifiers and multiple extraction units, and they'll schedule around your operating hours when the space allows.
Expect containment barriers that keep dust and moisture out of unaffected suites, coordination with your property manager, and the drying logs your adjuster will ask for.
Removing visible water is half the job. Contractors set air movers to push air across wet surfaces and refrigerant or desiccant dehumidifiers to pull moisture out of the air, then check progress daily with moisture meters until materials reach dry standard.
Thermal imaging cameras help find wet pockets behind walls without tearing everything out, and small weep holes drilled behind the baseboard can dry a wall cavity without full demolition.
Once the structure is dry, the visible repairs start: replacing sagging ceiling drywall, patching and texture matching, new insulation, baseboard, and flooring. Many contractors handle both mitigation and rebuild, so you aren't juggling two companies.
Ask about texture and paint matching on ceilings and walls; a good repair shouldn't leave a visible patch.
Water from a sewer backup or rising floodwater is treated as contaminated. Crews suit up in protective gear, tear out porous materials that can't be cleaned, apply antimicrobial treatment, and dry the space under containment.
Keep everyone, especially children and pets, away from the affected area until it has been cleaned and disinfected by a pro.
Four steps, usually in the order below. The first one takes about two minutes.
Dial +1-323-329-3586 and tell the dispatcher what happened, where the water is, and whether it's still coming in. If you can safely shut off the main valve or breaker, do it first.
An independent contractor serving your area gets your details and confirms an arrival window. For active leaks and flooding, crews often arrive within the hour.
The contractor finds the source, measures moisture, classifies the water, and walks you through scope and price before starting.
Extraction and drying begin with daily moisture checks. Once materials are dry, repairs follow, and you keep photos and readings for your records or insurer.
There are plenty of names in a search result. These are the reasons people come back to this line when water shows up.
No vague estimates. The contractor explains scope and cost before any work begins, and changes get discussed with you first.
Active leaks and flooding get priority routing, and many contractors reach emergency calls in about an hour depending on distance and conditions.
Calls are routed to contractors who already work your part of the county, so you aren't waiting on a crew driving in from hours away.
Every contractor is independent and expected to hold proper licensing and insurance. Ask to verify it on arrival, which reputable pros welcome.
Photos, moisture maps, and drying logs give your adjuster the evidence they need, which can speed up a claim.
If a contractor can't make it or isn't the right fit, call back and you'll be routed to another one. You should be matched with someone you're comfortable letting into your property.
Our water heater let go in the garage around midnight and ran into the laundry room. The contractor showed up in under an hour, had the water out by 2 a.m., and set fans and a dehumidifier. He showed me the moisture readings every day until it was dry.
We came home to the kitchen ceiling on the floor from an upstairs sink line. The quote was clear before work started, and the documentation made our claim straightforward.
A sprinkler line broke in one of our suites over a weekend. The crew sealed it off, ran dehumidifiers through Sunday, and the rest of the building opened Monday as usual.
Our basement took water after a heavy storm. The contractor explained it was Category 3 because it came from outside, cut out the bottom two feet of drywall, treated everything, and it's stayed dry since.
We had a musty smell for weeks. The contractor used a thermal camera to find a leak behind the shower wall, opened only what was needed, and repaired the subfloor.
For active leaks and flooding, many contractors in the network arrive within about an hour. Exact timing depends on distance, traffic, and weather, and the dispatcher gives you an estimated window when you call.
The call itself is free. Pricing comes from the contractor, who assesses the job and explains the cost before any work begins.
Contractors handle emergency extraction, flood pumping, drying setup, sewage and Category 3 cleanup, and temporary protection like tarps, 24 hours a day.
We're a referral line, not a contractor. Every job is performed by an independent professional, and you deal with them directly on pricing and terms.
It depends on the cause. Policies usually cover sudden events like a split supply line but often exclude slow leaks and floodwater without separate flood coverage. The contractor's photos and moisture logs help either way.
Typical drying runs about three to five days. Dense materials like hardwood and concrete slabs can need more time, which is why moisture readings, not the calendar, decide when it's done.
Stop the source at the main shutoff, kill the breaker for affected rooms if it's safe, lift furniture off wet carpet with foil or blocks, and photograph everything.
Household fans move air at the surface but can't pull moisture out of wall cavities or subfloors. Without dehumidification and moisture readings, materials can look dry and still grow mold.
Mold can begin growing within 24 to 48 hours on wet drywall, carpet pad, and wood, which is why fast extraction and drying matter so much.
They do. Commercial calls for offices, stores, restaurants, and apartment buildings are routed to contractors with the larger equipment and crews those jobs need.
Yes. There's no charge to call or to be connected. You only pay the contractor for work you agree to.
Yes, and you should. Every contractor is independent, and checking license and insurance before they begin protects you.
Calls come in from houses, condos, rental units, and businesses in Dane County, and each one goes to an independent contractor who already works that area. Distance and availability decide who gets the call, so you aren't waiting on someone from across the county.
Local knowledge matters here. A contractor who works your area knows whether homes usually sit on slabs, basements, or crawl spaces, and what that means for where water hides.
From the county seat out to unincorporated areas, contractors serving Dane County respond to homes, farms, and businesses alike. Rural properties on wells and septic systems get the same routing as in-town addresses.
Travel distances in a county are longer than inside one town, so the line routes each call to whichever contractor sits closest to the property, not just the biggest name in the county.
Every hour counts on a water loss. Call +1-323-329-3586 and get routed to a licensed, insured independent contractor serving Dane County.
Get a contractor routed to youCall +1-323-329-3586